Telangana Tools Corporation

Product Description:

The fischer Superbond Mortar FIS SB is a hybrid mortar based on styrene-free vinyl ester. Silane technology enables extremely high bond strength and therefore also an extremely high load level. The Superbond mortar FIS SB can be used with the system components, the anchor rod FIS A, the anchor rod RG M, as well as the reinforced threaded anchor FRA and reinforcement steel. When using the internal threaded anchor RG M I, the fixing point can be removed when surface-flush. The fischer Superbond mortar FIS SB is suitable, for example, for fixing system components within internal and external areas such as railings, noise barriers, or heavy steel structures.

Advantages:

• The injection mortar FIS SB achieves a really high load level thanks to its bond strength.
• Variable anchorage depths from 4x to 20x the threaded rod diameter enable perfect adaptation in line with the load to be applied, thus ensuring an optimised installation time and use of materials.
• Top application temperatures of up to +150°C open up new usage areas for bonded anchors.
• The processing of the mortar is even approved down to a chilly –15°C.
• In combination with the internal threaded anchor RG M I, this product enables surface-flush removal and the reuse of the fixing point. This provides top flexibility.
• The standard threaded rod FIS A can be set for light dynamic loads with the mortar injection system FIS SB in the sizes M12 and M16 in steel grade 8.8 or in the sizes M12, M16, M20 and M24 in stainless steel R and the fischer filling set.

Top Features:

• Extremely high load level in cracked and non-cracked concrete ensures maximum safety.
• Variable anchoring depths optimise installation time and materials required.
• Installation from -15 °C to 40 °C.
• ETA approval for cracked concrete and seismic loads.

The reliable injection mortar for anchorings in masonry

Product Description:

The fischer Injection mortar FIS P is a polyester resin mortar for the economical fixing of gratings, cantilevers and handrails in masonry which do not require approval. The FIS P is processed with the system components fischer threaded rod FIS A, fischer internal threaded rod FIS E together with the fischer injection anchor sleeves indoors and outside. Cartridges already opened can be reused by simply changing the static mixer. This saves time and money during installation.

Advantages:

• The FIS P is the economical solution for anchorings in masonry that do not require approvals.
• The FIS P 300 T can be used with stable, standard silicone injection dispensers. No special equipment is required. This helps to reduce procurement costs.

Product Description:

The Fischer High-performance Mortar FIS V 360 S is the universal all-rounder for the highest requirements. The styrene-free vinyl ester hybrid mortar with its numerous fixing elements is approved for fixations in cracked and non-cracked concrete as well as in masonry. However, the injection mortar is also used with the approved system components for rebar connections, the fischer remedial wall tie VBS 8, the fischer weather facing wall tie FWS II, and the stand-off installation system Thermax. The variant FIS VS LOW SPEED enables an extended processing time at higher processing temperatures or a greater drill hole depth. The shorter hardening time of the variant FIS VW HIGH SPEED enables swift work progress even at low temperatures.

Advantages:

• The Injection Mortar FIS V has a range of system approvals, for cracked and non-cracked concrete, masonry, and rebar connections, for example. FIS V is therefore the universal injection mortar family with guaranteed safety for almost every application.
• FIS VW HIGH SPEED has a significantly shorter hardening time than FIS V, which ensures swift work progress even at low temperatures.
• The FIS VS LOW SPEED has an extended processing time that prevents the premature hardening of the mortar at higher temperatures. It is ideally suited to large drill hole depths.
• The extensive range of accessories is perfectly tailored to the injection mortar family FIS V, increases the high flexibility of the system, and thus enables a broad range of applications.

Product Description:

The fischer Superbond mortar FIS SB is a hybrid mortar based on styrene-free vinyl ester. Silane technology enables extremely high bond strength and therefore also an extremely high load level. The Superbond mortar FIS SB can be used with the system components, the anchor rod FIS A, the anchor rod RG M, as well as the reinforced threaded anchor FRA and reinforcement steel. When using the internal threaded anchor RG M I, the fixing point can be removed when surface-flush. The fischer Superbond mortar FIS SB is suitable, for example, for fixing system components within internal and external areas such as railings, noise barriers, or heavy steel structures. The concrete all-rounder.

Top Features:

• Extremely high load level in cracked and non-cracked concrete ensures maximum safety.
• Variable anchoring depths optimise installation time and materials required.
• Installation from -15 °C to 40 °C.
• ETA approval for cracked concrete and seismic loads.

Advantages:

• The injection mortar FIS SB achieves a really high load level thanks to its bond strength.
• Variable anchorage depths from 4x to 20x the threaded rod diameter enable perfect adaptation in line with the load to be applied, thus ensuring an optimised installation time and use of materials.
• Top application temperatures of up to +150°C open up new usage areas for bonded anchors.
• The processing of the mortar is even approved down to a chilly –15°C.
• In combination with the internal threaded anchor RG M I, this product enables surface-flush removal and the reuse of the fixing point. This provides top flexibility.

Product Description

The Fischer Injection Mortar FIS VL is a vinyl ester hybrid mortar with approval for fixing standard applications in cracked concrete and masonry. The FIS VL is processed with the approved system components fischer threaded rod FIS A and fischer internal-threaded anchor RG M I indoors and outside. The temperature resistance of the FIS VL injection mortar of -40 °C to +120 °C allows for a solid load level even when subjected to high temperature demands, thus providing great flexibility. The shorter hardening time of the variant FIS VL HIGH SPEED enables swift work progress even at low temperatures.
The solid injection mortar for standard applications in cracked concrete and masonry
Advantages

• The FIS VL is approved for use in cracked concrete and masonry, and achieves a high load-bearing capacity in these conditions.
• The injection mortar, based on vinylester resin, allows for anchorings in water-filled drill holes (410 ml cartridges only), thus allowing for rapid progress.
• The temperature resistance of the FIS VL injection mortar of -40 °C to +120 °C allows for a solid load level even when subjected to high temperature demands, thus providing great flexibility.
• FIS VL HIGH SPEED has a significantly shorter curing time than FIS VL, thus also ensuring swift work progress even at low temperatures.

Product Description

The Fischer Injection Mortar FIS EM Plus 585 S is a high-quality epoxy resin mortar for maximum load-bearing capacity in cracked and non-cracked concrete. Alongside the injection mortar, the injection system consists of reinforcement steel, the approved components anchor rod FIS A and internal threaded anchor RG M I. The anchor rod FIS A can be set with variable anchorage depths. This enables the system to be ideally adjusted to the load to be supported. This optimises the use of materials. The epoxy resin mortar is suitable for fixings in indoor and outdoor areas such as shear connectors for concrete layers, or heavy-duty steel constructions.

The powerful injection mortar for rebar connections and cracked concrete.

Top Features

• FIS EM Plus with optimised formulation for improved load values in cracked and non-cracked concrete.
• The ETA assessment guarantees a service life of 100 years, an external expert report even up to 120 years.
• For rebar connections from diameter 8 to 40 mm.
• Can be used with threaded rod FIS A or internal threaded anchor RG M I for temporary and removable fixing points.
• FIS EM Plus is to be processed at temperatures down to -5°C.
• More safety due to approvals for diamond drilled and water-filled drill holes as well as seismic applications of performance categories C1, C2.

Advantages:

• The optimised formulation of the epoxy mortar FIS EM Plus leads to improved load values in cracked and non-cracked concrete.
• The ETA assessment guarantees a service life of 100 years. The IEA expert report even confirms a working life up to 120 years and thus underlines the reliability and durability of the FIS EM Plus.
• The mortar can be used for rebar connections from diameter 8 to 40 mm.
• With the threaded rod FIS A, the loads to be applied can be designed variably by selecting the anchorage depth.
• Temporary and detachable fixing points are possible with the internal threaded anchor RG M I.
• For practical use on the building site, FIS EM Plus can be processed at low temperatures down to -5° C.
• The mortar is approved for diamond-drilled and water-filled drill holes as well as seismic applications of performance categories C1, C2 and thus offers safety under extreme conditions.

Product Description:

The Fischer Injection Mortar FIS EM Plus 390 S is a high-quality epoxy resin mortar for maximum load-bearing capacity in cracked and non-cracked concrete. Alongside the injection mortar, the injection system consists of reinforcement steel, the approved components anchor rod FIS A and internal threaded anchor RG M I. The anchor rod FIS A can be set with variable anchorage depths. This enables the system to be ideally adjusted to the load to be supported. This optimises the use of materials. The epoxy resin mortar is suitable for fixings in indoor and outdoor areas such as shear connectors for concrete layers, high racks, or heavy-duty steel constructions.

The powerful injection mortar for rebar connections and cracked concrete.

Top Features:

• FIS EM Plus with optimised formulation for improved load values in cracked and non-cracked concrete.
• The ETA assessment guarantees a service life of 100 years, an external expert report even up to 120 years.
• For rebar connections from diameter 8 to 40 mm.
• Can be used with threaded rod FIS A or internal threaded anchor RG M I for temporary and removable fixing points.
• FIS EM Plus is to be processed at temperatures down to -5°C.
• More safety due to approvals for diamond drilled and water-filled drill holes as well as seismic applications of performance categories C1, C2.

Advantages:

• The optimised formulation of the epoxy mortar FIS EM Plus leads to improved load values in cracked and non-cracked concrete.
• The ETA assessment guarantees a service life of 100 years. The IEA expert report even confirms a working life up to 120 years and thus underlines the reliability and durability of the FIS EM Plus.
• The mortar can be used for rebar connections from diameter 8 to 40 mm.
• With the threaded rod FIS A, the loads to be applied can be designed variably by selecting the anchorage depth.
• Temporary and detachable fixing points are possible with the internal threaded anchor RG M I.
• For practical use on the building site, FIS EM Plus can be processed at low temperatures down to -5° C.
• The mortar is approved for diamond-drilled and water-filled drill holes as well as seismic applications of performance categories C1, C2 and thus offers safety under extreme conditions.

Product Description:

The fischer Highbond special mortar FIS HB 345 S is a system component of the fischer Highbond system FHB II for fixing in cracked and non-cracked concrete. The cartridge contains styrene-free vinyl ester mortar. The special mortar can be used with the fischer Highbond anchor rods FHB II-A S (standard), Highbond anchor rods FHB II-A L (long) made of zinc-plated steel, made of stainless steel, and made of highly corrosion-resistant steel. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that railings, machines, and steel constructions are securely installed within internal and external areas.
The best performance in cracked concrete with injection mortar.

Top Features:

• Maximum load values in cracked concrete. Thus fewer fixing points are necessary.
• Ideal for series installation.
• Can be flexibly used for all lengths and diameters of Highbond anchor rods. This lowers complexity.
• ETA approval for cracked concrete.

Advantages:

• The Highbond system FHB II achieves the highest load values in cracked concrete. This means that fewer fixing points and smaller anchor plates are required.
• The injection mortar FIS HB can be worked with the threaded rod FHB II-A S (short version ) or L (long version). Thus, you can select the most economical solution based on requirements.
• The large container shape of the injection mortar FIS HB is ideally suited to series installation.

Product Description:

The Fischer Injection Mortar FIS EB is an economical epoxy resin mortar for standard applications in cracked and and non-cracked concrete and for rebar connections. It is suitable for fixing heavy loads both inside and outside. The FIS EB is processed with the approved system components fischer threaded rod FIS A or with reinforcement bars. The FIS EB can be used in dry or wet concrete, but also in water-filled drill holes. This makes the epoxy resin mortar a secure and reliable system even in unfavourable conditions.
The basic epoxy mortar for applications in concrete.
Advantages

• FIS EB is approved for rebar connections according to ETA and for use in cracked concrete according to ETA and ICC. The injection mortar achieves a reliable performance in many applications which enables economical use.
• FIS EB can be used under various installation conditions and is approved for seismic applications, making it a safe system.
• Variable anchorage depths allow ideal adaptation to the load to be transmitted.

Product Description

The Fischer High-Performance Mortar FIS V is the universal all-rounder for the most demanding requirements. The styrene-free vinylester-hybrid mortar is the first system worldwide that is approved for fixings in perforated brick, solid brick, concrete, and aerated concrete. The injection mortar system also benefits from approved system components such as anchor rods, anchors with internal threads, and injection anchor sleeves for fixings in concrete, aerated concrete, and masonry in both internal and external areas. The fischer high-performance mortar FIS V is also used with the approved system components for rebar connections, the fischer remedial wall tie VBS 8, and the Thermax stand-off insulation system.

The versatile injection mortar for anchorings in cracked concrete and masonry.
Top Features

• ETA approval for reinforcement connection.
• Maximum load absorption for much greater security.
• Expansion-free fixing for small spacings and edge distances.
• Extensive range of system accessories.
• First injection mortar system worldwide with approval for all relevant building materials

Advantages

• The installation mortar is approved for standard applications in solid and perforated brick masonry and non-cracked concrete.
• The proportion of cement in the installation mortar ensure good temperature resistance from -40°C to +80°C.
• The range of accessories is ideally suited to the installation mortar and increases the great flexibility of the system for a wide range of applications.
• The installation mortar 150 C and 300 T can be used with stable, standard silicone dispensers. No special equipment is required.

The basic epoxy mortar for applications in concrete
Product Description
The Fischer Injection Mortar FIS EB is an economical epoxy resin mortar for standard applications in cracked and and non-cracked concrete and for rebar connections. It is suitable for fixing heavy loads both inside and outside. The FIS EB is processed with the approved system components fischer threaded rod FIS A or with reinforcement bars. The FIS EB can be used in dry or wet concrete, but also in water-filled drill holes. This makes the epoxy resin mortar a secure and reliable system even in unfavourable conditions.

Advantages

• FIS EB is approved for post-installed rebar connections according to ETA and for use in cracked concrete according to ETA and ICC.
• The injection mortar achieves a reliable performance in many applications which enables economical use.
• FIS EB can be used under various installation conditions and is approved for seismic applications, making it a safe system.
• Variable anchorage depths allow ideal adaptation to the load to be transmitted.

Product Description

The Fischer Resin Capsule RM II is the first composite anchor with European Technical Assessment Option 1 for cracked concrete, which can be used in combination with a standard threaded rod (RG M) and does not require drill hole cleaning. Steel constructions, machines or staircases outside and indoors can be fixed with the resin anchor. The resin capsule can be used with the fischer threaded rod RG M and the fischer internal threaded anchor RG MI. Hole cleaning is not necessary with the resin capsule RM II, however comparatively high loads can be supported. This allows fast progress and secure application.

The bonded anchor for cracked concrete without drill hole cleaning.

Top Features

• Resin capsule for fixings in cracked concrete.
• Fast processing without drill hole cleaning.
• Secure anchorage of high loads.
• Ideal for single point fixings and overhead installations.
• Numerous threaded rods available as accessories.

Advantages

• RM II is the first bonded anchor with threaded rod RG M or internal-threaded anchor RG MI that does not need drill hole cleaning. This allows fast progress and efficient installation.
• In addition, the construction site is less affected by drill dust. This increases safety for the user.
• The pre-portioned resin capsule is easy to use and particularly suitable for individual applications and overhead installations.
• Use of the internal threaded anchor RG MI allows the surface-flush removal and reuse of the fixing point, and therefore offers the best possible flexibility.