Telangana Tools Corporation

Product Description:

The Fischer Rod Anchor RG M is made of zinc-plated steel with a grade of 5.8. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas.

The proven rod anchor for internal use with a mortar cartridge or injection mortar.

Top Features:

• Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars.
• Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge.
• Zinc-galvanised steel for internal use.

Advantages:

• The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility.
• The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety.
• Please refer to the approvals for the resin capsules and mortar used.

Product Description

The fischer threaded rod FIS A is made from zinc-plated, steel grade 5.8. The threaded rod is a system component for the various fischer injection mortars. Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces. A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the system. The system, made from zinc-plated threaded rods in conjunction with fischer injection mortars, is suitable and approved for fixings in dry interiors.

The FIS A versatile rod anchor

Top Features

• The universal solution for various fischer injection mortars. For a manageable range and simpler storage.
• Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various fischer injection mortars.
• Optimum load adaptation due to variable anchorage depths. This lowers installation and material costs.

Advantages

• The threaded rod FIS A can be used with almost every fischer injection mortar (except Highbond special mortar FIS HB). It can be individually selected based on requirements, thus allowing for a wide range of applications.
• The wide range of approved threaded rods FIS A from M6 to M30 allows for various applications.
• Please refer to the approvals of the injection mortar used.

Product Description:

The fischer anchor rod FTR is an economical system component without approval for the fischer reaction cartridges RSB and RM II as well as the fischer injection mortar. The use of the pre-portioned reaction cartridge is particularly economical for individual fastenings. The anchor rods made of hot-dip galvanised and galvanised steel enable a wide range of applications. The system is particularly suitable for economical fastening indoors, for which no approval is relevant. The FTR is set with the composite anchor setting tool with a rotary hammer. When the reaction cartridges are set, the characteristic sloping roof destroys them, mixes them and activates the mortar mass.

The cost-effective threaded rod with oblique edge without approval.

Advantages:

• The threaded rod FTR is the cost-effective solution for applications with resin capsules where no approval is required.